DL-24 Electronic Load Housing (Box)
Description
This Thing was designed for my nice DL-24 electronic load. Didn't find anything on Thingiverse, which would fit my el. load. So I designed my own. Printing was quite easy, Only "housing.stl" required some attention, as "air-windows" stand on some flimpsy posts, so I reduced at this stage speed of my Prusa and everything turned out fine. Photographs show a previous version, I refined some parts for your convenience, or in the unlikely case to print a second one. For the lid, there maybe a little rework necessary, until it fits, maybe a little grinding, but as already mentioned my parts turned out fine. Note: I took off the plastic stands (4 feet) and let the PCB rest just on the BasePlate. I even haven't taken precautions to limit the el. load against dropping "UP", there are limits! The "zsb.stl" file shows also screws and the inner structure. Not sure if you would be able to disassemble it? Have fun, I printed medium quality, 0.2mm. Nice! This is b.t.w. an excellent electronic load! I am excited from the make and performance! Thanks to Banggood!
Statistics
Likes
12
Downloads
0