IC-7200 Side rail handles
Description
These are rails that can be mounted to the side of the IC-7200 HF radio from Icom. They provide protection and handles. I have lifted the radio many times using these handles and when printed correctly they are strong enough. I recommend printing them from a strong material, like PLA-Pro, Nylon, or petg. I am able to print these laying flat diagonally across the bed of my Creality CR-10 (I included a photo showing the placement). They can be split for printing on smaller beds. I have included the step files so they can be easily imported into your favorite 3d modeling software for splitting. The model can also be found on onshape.com: https://cad.onshape.com/documents/33e09a21b24d474b13643135/w/6a4811fbf7b498215269be4e/e/b8483531217bb1fb6870a2f6 To attach these to your radio you will need 4 m4x20mm screws and 1-4mm washers. Do not use any longer of screws or you could damage your radio.
Statistics
Likes
6
Downloads
0