Pond Plant Base
Description
If your pond plants keep falling over due to heavy wind, then this model is the solution! The base is designed for square planters that are 90mm square at the bottom, and 95mm square at a height of 60mm (scale the model according you your planter size). Due to the use case of this model, you can print it at large layer heights with low infill percentage. For me, the print took just under 2 hours. Once printed, simply click the two halves together. The clearances of the model should result in a nice fit between the two parts. <b>Support</b> If you want to support me for the designs I publish for free, please consider using my AliExpress Affiliate Link (https://bit.ly/2XYWpHW) when buying something from AliExpress. It doesn't cost you anything extra, but helps me out a lot :)
Statistics
Likes
2
Downloads
0