Immortal T Cinewhoop mount
Description
this is a mount for the Immortal T antenna used for 900Mhz receivers. (TBS CrossFire/FrSky R9) i made the mount to fit my cinewhoop, which started life as Donut Cinewhoop. the mounting holes are 21mm apart but when printed in a flexible material there is enough flex to fit wider and narrower frames. it brings the antenna slightly up to fit roughly in the center of the ducts. the immortal T sits snugly in the mount and wont fall out. i strongly advice to use a flexible PETG or a stiff TPU. you can fiddle with infill to make it stiffer or more flexible. 35% infill with TPU gave me the best result. printing is done flat with (tree) supports
Statistics
Likes
7
Downloads
0