Artillery X1 side spool with filament guide
Description
I created these files to allow me to remove the weight of the spool from the top of the tall printer while still having the filament enter the extruder from above and use the stock run-out sensor. I created the spool holder to work with the bearings and fasteners that came with the printer's stock spool holder. I used the M3 drop in T-nuts here: http://www.thingiverse.com/thing:3050607 to attach the 3 guides to the printer and the main guide uses an M6 PTFE coupler. Initially, I used an old coupler that came off my ender but replaced it with a new one (same size) that I got with some fresh Capricorn PTFE tube. In total, there are 5 M3 cap head screws and nuts used and they were 6mm or 8mm long if I remember correctly All were printed in both PLA+ and PETG successfully without supports
Statistics
Likes
83
Downloads
0