Ender 3 Fang for 40mm axial fan - Inductive mount
Description
- Hot end space is now bigger and with straight edges for micro swiss or similar hot ends. Still works with the stock hot end. - Added mount for a 12mm sensor (inductive or capacitive) - Fans now mount with 2 screws each - Made stronger mounting holes for parts cooling fan and added chamfer for easy printing Required hardware: 4x 25xM3 bolts for fans (2 per fan) 2x 8xM3 bolts for sensor clamp Settings: Offset is {-45 , +1 } Print settings: - Supports touching buildplate - I used 0.2mm layer height. 0.12 would probably work better - PLA works well. Use PET-G if you want higher temperature resistance
Statistics
Likes
14
Downloads
0