Parallete Bars
Description
Parallettes Bars! I made them on a MOARstruder and they are perfectly strong enough to take my full weight. I have tested them by standing on just one corner part. There are two .stl versions depending on whether you prefer 28 mm or 35 mm dowel diameter. The 28 mm diameter dowel is available from B&Q etc. https://www.diy.com/departments/pine-dowel-28x28x2400mm/1821978_BQ.prd The 35 mm diameter dowel is: https://www.diy.com/departments/pine-dowel-35x35x2400mm/1821979_BQ.prd Cut the dowel pieces to length. I have made a travel set as shown in the pictures with 18 inch bars and a 24 inch set that live at home full time. If you feel fancy, slightly round the corners with sand paper. The dowel is a friction fit with the support corners. Twist the bar into the support corner. Inspect the fit before use each time! For use on carpet. Stick rubber feet on otherwise at own risk!
Statistics
Likes
9
Downloads
0