Parameteric Camera Mount
Description
I use hex standoffs in my builds (easier to tighten with a wrench) which require 6mm holes instead of the more common 5mm holes used for round standoffs. nablabla's design was what I needed, and I tried to modify it, but I ended up recreating a parametric version of the same shape in OpenSCAD. This mount is designed for installing the DJI FPV camera in a TBS Source One frame, but I suspect that it would work for other cameras/frames, and being parametric it can be customized readily. The default dimensions are for 5mm or 6mm standoffs 30.5mm apart and a camera that is 19.8mm wide with mount screws 6mm apart. The nicely blended contours of the original are a bit beyond my OpenSCAD skills so my version is bit crude compared to the nablabla's design. The main advantage is that this version is parametric and I've provided versions for 5mm and 6mm standoffs. But if you only need the 5mm version I'd suggest using the original since it's a bit nicer :-).
Statistics
Likes
13
Downloads
0