Artillery Genius - Step Down Support
Description
I changed the heatblock fan with a 12V fan silence. I used the step down module LM2596 to decrease the 24V to 12V, so I created a support to attach the module to the extruder block. - You need 2x M3x30mm screws. - If you have the support for BLTouch you need 2x M3x35mm screws. I uploaded three files, the Base, the Cover and the Spacer, you have to print one base, one cover and two spacers. The lenght of spacers defines the space between the filament's fan and the support for the step down module. With the spacer I uploaded the space is 5mm, if you want you can extend the spacer (remember to extend also the screws!). PS. The Artillery logo on the cover is also an air intake for the step down module.
Statistics
Likes
13
Downloads
0