V6 X Carriage for mounting on existing extruder bracket
Description
This is a remix of an existing mount, but I can not find where downloaded it. I am happy to link to that when I find it or someone points it out to me. The BL Touch Jacket is a remix of this one: https://www.thingiverse.com/thing:3197149 I created this mount to for my own custom build printer for parts of a broken 3Novatica Gate and a broken Anet A8. I did this so that I could use the existing bracket that mounted the extruder with an E3D V6. I also wanted to add Noctura fans to lower the overall printer volume. CHANGES I HAVE MADE: I have flipped the object and the BL Bracket. I have added the mounting holes for the motor mount bracket I have heavily modified the Clamp to make it narrower, keeping the holes in the same position which makes for easier installation. Added groves to the top of the BL Touch Jacket so screws do not get in the way. Took 1.5mm off the nozzle of the Jacket as it was too low for the probe to engage. PROBE OFFSET The offset working on my printer is X31.50 Y-27.00 PRINTING Carriage - 60% Infill Clamp - 100% Infill Mount - 100% Infill Jacket - 20% Infill ASSEMBLY I recommend firing a heat gun (for about 10 seconds) at the neck holder of the clamp and carriage and immediately press the V6 into it, this will ensure a snug fit. Same again for the Jacket, it took me 3 attempts of fire heat gun inside the jacket, push BL as far as possible. Remove and repeat. now the inside of the jacket is perfectly formed around the BL and it takes a little force to remove.
Statistics
Likes
0
Downloads
0