Bottle holder for bicycles
Description
The holder should fit on any bike. It´s mounted with two screws in M5. The holes for the screws got a diameter of 5.5 mm and the distance between them can be adjusted from 50 to 70 mm. I would recommend to use PETG on that one, because of it´s flexibility and strength. If you don´t intend on usig it on a mountainbike or any kind of rough trail PLA might just be able to do the job. It can be printed with or without support. The triangels are needed to stop the print from warping and can be removed after printing!
Statistics
Likes
5
Downloads
0