Exhaust Nozzle and pitot for ArrowsRC Mig 29
Description
Exhaust nozzle for the ArrowsRC Mig 29. It has an exit diameter of 58mm and tapers smoothly internally. It requires some foam to be trimmed in order to fit. To save weight it is very thin so your printer will need to handle that, and it will be fragile until fixed in place. I used 5% fill and printed with the thinnest walls my printer would handle, and each nozzle came out at 30grams. You will need to print a right and a left hand version. The pitot is just in case you break off the stock one. Print it however you think best for your printer. Use the existing M1.8 screw (or a new one).
Statistics
Likes
16
Downloads
0