Flaming Skull Topper ($7 Cane/Walking Hiking Sticks)
Description
I have provided a one piece and split (front/back) .stl files. Both versions will need supports but the split version is easier to clean up. If you want to make a taller stick/staff, grab my 1" cane coupler from here: https://www.thingiverse.com/thing:3810485 Also, check out my 1" wall mount clips for displaying your canes/sticks: https://www.thingiverse.com/thing:3845550 You can make an awesome solid oak cane / walking stick for about $7. In addition to the printed topper of your choice you will need a 1” oak dowel which costs about $6 at Home Depot and a 1” rubber leg tip – about $4 for 4 of them. Links below are just for your reference so you know what to buy: 1” Oak Dowel: https://www.homedepot.com/p/Builder-s-Choice-1-in-x-36-in-Oak-Round-Dowel-HDDO136/206184686 1” Leg Tip: https://www.amazon.com/gp/product/B000QD30TE Or, if you want to print your own tip, you can customize one here: https://www.thingiverse.com/thing:4116507 The topper .stl file is sized for the 1” dowel if printed at 100%. If you want to use for a different size stick – just adjust accordingly. I print at 20% infill and then paint and coat with a 2-part epoxy resin to add the deep gloss and strength. https://www.amazon.com/gp/product/B07BM9LHRB Just print the topper, glue to the finished dowel (sand and clear coat)with desired adhesive (I just use some of the 2-part resin I have mixed up for the final topper coat. You will end up with an awesome walking stick – or more if you are into collecting as I will be doing a lot of these. If you like this remix, check out the original models listed in the left sidebar. If you want to see all the toppers I have remixed, use this link: https://tinyurl.com/y52dvze2 I have designed over 600 remixes of various types. If you want to search by the type, visit my profile: https://www.thingiverse.com/ToaKamate/about
Statistics
Likes
24
Downloads
0