Coolice Hypercube Evolution Rev.3 Aero & BLtouch Holder - Remix Aero with thumb wheel
Description
WARNING: After a few weeks of printing with this holder, I can say, it works well. However I can only recommend not to use it in conjunction with the low profile stepper sold by E3D. With a stepper current that provides sufficient torque, the stepper reaches temperatures which cause the PETG to deform (see second picture). Not sure if other designs hold up better but the mentioned combination is certainly not ideal. --- Original description below --- This is a remix of the Aero holder for Aeros with the thumb-screw to adjust pressure on the filament. The screw can be accessed from the top - a bit finicky but it works. It's a small modification to the original design by helicopterguru: https://www.thingiverse.com/thing:4036167 You can only use 3 of the metal pins to support the connection between carriage and aero assembly as one pushes against the wheel. The holder is a bit thicker than expected so you also need slightly longer screws to attach the aero to the motor. M3x35 work for me. UPDATE 20200721: The (re)build is complete. It's working great. Added a slightly longer X-Endstop to achieve the necessary clearance for the assembly. Otherwise - on my hevo - the hotend assembly would have crashed into the motor mount when homing.
Statistics
Likes
3
Downloads
0