Soda Bottle Rocket Launcher (OLD BETA VERSION)
Description
This is the OLD PUBLIC BETA VERSION of the Water Rocket Launcher. Current Version 1.0 Thingiverse files are at Thing 4949248: https://www.thingiverse.com/thing:4949248 Current Instructables overview is at: https://www.instructables.com/id/3D-Printed-Water-Rocket-Launcher/ Detailed instructions and design notes are at magicsmokestat.com: https://magicsmokestat.com/water-rocket-launcher/ ================= OLD PUBLIC BETA VERSION BELOW ================ Model files for Bottle Rocket Launcher. Detailed assembly instructions on Instructables: https://www.instructables.com/id/3D-Printed-Bottle-Rocket-Launcher/ COMPONENTS - Base: Main structure. Holds up to >200lb of force - Clips: Six clips are needed to hold the bottle to the launcher - Collar: Holds clips in place, interfaces with rubber bands - Tube_Adapter: Forms launch tube interface and O-ring seat - Launch_Pin: Pin that holds collar in place until launch - Foot: Three feet, optional, which provide additional stability Print tips: - Tested with Creality Ender 3 Pro - All files except Tube Adapter: 20% cubic infill, no supports, 0.28mm layers, line width 0.4mm. 3-4 walls. - Tube Adapter: 100% infill, WITH SUPPORT, 0.28mm layers, line width 0.4mm, 3-4 walls. - Print orientation should be as imported into your slicer, but for clarity, the Clips should be printed on their narrow sides (beveled edges facing toward one side) and the Foot should be printed in the same orientation as installed: the ground interface flat and the tube interface as a 60 degree overhang. - 3D printers can vary in dimensional accuracy and PVC pipes can vary slightly in internal diameter. You may need to scale models slightly. This is only critical with the Tube_Adapter part; print this first, adjust the scale as needed (should be only 1-2%), and scale the rest of the model the same (or not- it probably won't matter). You should be fine if the Tube Adapter and Feet dry fit in your PVC pipe after a medium knock, and are hard to pull out by hand. As a reference, the flats of the outside of the collar measure 44.8mm +/- 0.4mm in the STL file. CHANGELOG 2020-07-11: Original release of beta 1 series 2020-07-30: Updated Base to beta 2. Additional reinforcements (side ridges) 2020-08-04: Added Base_wide_beta_1 which is significantly stronger. 2020-08-21: Added Tube_Adapter_qtr-20_beta_1, which updates the center screw to 1/4-20 from 10-24. Slightly increased outer diameter (15.4mm vs 15.2mm) as well. 2020-08-23: Uploaded Beta 3 series, which is even more robust with strengthened Launch_Pin; Clips modified to make assembly orientation more clear. Removed mini model.
Statistics
Likes
29
Downloads
0