Tyro 79 Rx Mount with Antenna Guides
Description
Stacks along with the Rectangular Carbon fiber plate on top of the Tyro 79. The SMA holder replaces the stock metal VTX antenna guide, if you are upgrading the stock dipole antenna to a full SMA connector. Use 3mm Antenna tubes for the RX antennas. Takes M2 Screws. 1. Slide the screws into the Mount. 2. Fix the top plate.(Its a bit of a Tight fit, so you might have to wiggle it around a bit) 3. Attach the mount and top plate assembly to the frame. 4. Slide in the receiver. 5. Pass the antennas through the guide holes and insert antenna tubes. 6. Thread the SMA holder on the the SMA pigtail and fix it to the main mount body using m2X12 screw. Help me out by subscribing to my Channel: https://www.youtube.com/channel/UCWL4BD-G-ri0SdreMmH5O4Q Use Tip the designer to help out with any small amounts.
Statistics
Likes
5
Downloads
0