Oculus Quest keep it cool, no sweat
Description
Hi this is my version of the VR n CHILL. I live in Europe and the shipping costs of the original product made it to expensive to order it. So I made a somewhat similar design. I used to original vive kickstarter model for reverence. So all cudos to the makers of the original design This will give a nice air flow on your forehead to stop you from sweating. I used a normal usb cable with switch to a battery pack. You can also make it usb type c and plug it straight into your quest. BOM: - 2x 30mm fans 5V. (search for something with good bearings, will help keep te noise down) something like this: https://a.aliexpress.com/_dSuuzpx - usb cable with optional a switch. something like this: https://a.aliexpress.com/_dZUpu0V - Heat shrink (optional, if you want it to look nice...) - 2 m3x20mm bolts and - 2x m3 nut just solder it together, you will only need to solder the black and red wire for powering the fans. You can just use a little bit super glue for the fans in the casing (it's a snug fit) I used 3M tape to stick them on the headset. (3M-TAPE-20MM-1-AMA1) Depending on the quality of the fans they will make some sound, but when there is audio on I hardly notice it.
Statistics
Likes
12
Downloads
0