Wall mounted paper tray - ISO A4
Description
This is still a work in progress. This is my very first Fusion360 design originally based on [Paper Wall Hanger by squeekjjy August 25, 2015](https://www.thingiverse.com/thing:983009) which seemed to be the closest I could find to the solution I had in mind. The problem I have is that I have to stack numerous A4 sized documents against a wall and I couldn't find a commercially viable alternative. If you have any suggestions or improvements, please let me know! I am happy to accept your help. The minimum requirement is 2 of these trays as the sheet is guided through the through-slot which has a forward wall acting as a support ensuring that the paper does not flop forwards and a rearward wall for the easy attachment to a supporting structure via double-sided tape or via permanent fixings. The forward section of the second tray will then act as the base for the paper. This was designed to be scalable and easily printable. Filling my Prusa i3 MK3S bed with 7 samples and my custom CRAZY FAST setting (not actually crazy fast. Just tweaked a few extrusion width values) yields a print time of less than 6h30m. At about 55m per unit, this can certainly be streamlined but I'll get to that later. Work in progress, as stated above.
Statistics
Likes
0
Downloads
0