VAR Bottom Bracket bushings for Sram DUB
Description
Sram DUB bushing adapters designed for VAR PE-12500 BB press tool but will work with any 10mm press tool or homemade solution with threaded rod and nuts Just make sure you make a strong print using additional wall layers and top and bottom layers or even go for 100% infill. Mine are 6 walls, 5 top and bottom layers and 30% gyroid infill with 0.28 layer height on 0.4 nozzle If your part is not 100% infill, or even if it is, I would recommend you to use something like other bushings as back plate for the last tighten
Statistics
Likes
3
Downloads
0