CraftBot 2.3Kg Filament Spoolholder
Description
The Spoolholders Of The New Craftbot Are Fine, But Just To Small To Hold The Heavy 2.3 Kg Filament Rolls From Reprapworld. So I Made One Myself To Fit As Second Filament Holder On The Craftbot. It'S Designed To Be Printed With A Minimum Of Support Structure, That'S Why It'S Asymmetric. The Original Bolts Of The Craftbot Can Be Re-Used. To Be Strong Enough Not To Bend Under Weight, I Sliced It With 25% Infill And 7 Loops -So Minimal 2.5Mm Skin- In Kisslicer. Layer Height 0.3Mm And Support Angle To 70%. Printed With Pla. I Have Now 2 In Use. !! Beware: The Mac Version Is Uploaded Too, Be Sure To Pick The Right One!!
Statistics
Likes
15
Downloads
0