Micro Pan/Tilt Servo Bracket / Servo gimbal raspberry pi
Description
Micro Pan/Tilt Servo holder design to be used for raspberry pi camera. For this project the lower part is purchased (2 - 3$ +-), and the upper part is requires 3D printing. It's created out of two parts: - Holder that keeps the raspberry pi camera in place - Lid for the pi camera that requires 2 screws (they can be borrowed from the one servo motor) Printing settings I've used and looked good: PLA Layer Height: 0.2mm Infill Density: 20% Printing temperature: 200°C Build Plate Temperature: 47°C
Statistics
Likes
2
Downloads
0