Comfortable bed knobs for Artillery Sidewinder X1 and others 3D printers
Description
This is a inexpensive and comfortable solution for big makers with big fingers. The knobs have a diameter of 8 cm and make it very easy to level the bed on the Artillery Sidewinder X1. Materials needed: PLA black Geeetech or better 4 M5 nuts 4 metal washers with internal diameter 5.5 - 6 mm (if not already present) Printed with Cura 4.6.1 Geeetech PLA black Filament Layer height: 0.2 mm Extruder temperature: 205 ° C Bed temperature: 65 ° C for the first layer and 55 ° C for the following ones To insert the nuts in their seats it will be necessary to use a small hammer Have fun!
Statistics
Likes
7
Downloads
0