Simplex Ciniwhoop
Description
This is a remake of the Whirlygig Ciniwhoop to be printable as one entire piece. Prior design: https://www.thingiverse.com/thing:4321086 Designed for the following hardware: * 14 mm wide FPV Camera (Runcam Racer Nano) * Brushless motors no taller than 20 mm. (Examples: Xing 1105,1204) * SucceX F4 2-4S 12A AIO Whoop Flight Controller * SucceX Whoop VTX 25/100/200mW Adjustable * 3" Bi or Tri bladed Props Maiden flight video: https://youtu.be/1YPUoP2Z_hc Please note that this prints upside-down and that a .STL file has been provided @ 15% infill / .2 mm resolution. Print weight with PLA, 30-40 grams. **Edit** 12-01-2020: Added build V2 on Rotorbuilds: https://rotorbuilds.com/build/25396 10-31-2020: Added updated files.Link to Rotorbuilds thread: https://rotorbuilds.com/build/25148 11-17-2020: Created a variant with a honeycomb wall to reduce weight.
Statistics
Likes
12
Downloads
0