DIN-3 35mm Rail - Voron 2.4 and other 3D Printers
Description
DIN-3 35mm Rail - Voron 2.4 and other 3D Printers - Aluminum 2020 Mounting Bracket. Fasteners (for one side in version v1 or v2): 2x M3x20 socket cap head screw 2x M3x12 socket cap head screw 2x M3 T-nut<a href="https://s.click.aliexpress.com/e/_dZrICj1">2x M3 X D5.0 X L4.0 brass hot melt insert nut</a> Version 1 and 2 geometrically are exact the same. V2 has integrated 5mm top washer, in v1 the washer is separate part. You can also use v2 without 5 mm washer, but than you have to use 2x M3x6 button or socket cap head screw and two normal steal washers instead of two 12mm long M3 screw. I have added raw *.slvs SolveSpace source file, so you can easy customize it if needed. Printing settings: Print in actual STL orientation, no support, ABS 4walls, infill 70%, 6 solid layer top, 6 solid layers bottom. Post-printing: To brass hot melt insert nuts use soldering iron at 200C
Statistics
Likes
32
Downloads
0