Prusa Lack enclosure v2 leg extensions to fit a paver in enclosure
Description
I wanted the new prusa enclosure for the mmu2s hatch on the top but i wanted space for a paver aswell so i took and expanded the legs by 80mm to accommodate it. Make sure if you wish to use this to get your acrylic/plexiglass or what not 80mm larger than the guide. I included the stl and a 3mf (the 3mf just replaces the print 1 from the guide.) The guide I am following/modified can be found here: https://blog.prusaprinters.org/mmu2s-printer-enclosure_30215/ Note! This is for the 1/8th inch glass thickness prints and might not fit the 3mm ones.
Statistics
Likes
3
Downloads
0