Shower rod paint savers (FreeCAD)
Description
This is a "bumper" for a twist to expand shower curtain rod. I installed one of these on both opposing walls with an anchor and screw. This is to prevent the rubber ends from tearing the paint on the walls. These are 1/4 inch thick and 2 inches in diameter. This will work with a rod diameter that measures up to 1+3/4 inches because the outer 1/8 inch has a radius. Center screw hole is 5/32. Screw head diameter is 3/8 inch. FreeCAD source included.
Statistics
Likes
1
Downloads
0