Microphone Wall Stand
Description
This is the second version for the PS2 singstar microphone stand. (First version: https://www.thingiverse.com/thing:3087036) I have upgraded it because after some use I have seen some issues I could solve. First of all, the arm in this second version will not fall down due to his weight, it will instead stay in place. Secondly, I have upgraded the base so now it holds better to the wall plate. Materials: - 3 M5 screws to hold GoPro style parts together. - 4 M4 screws, 2 to hold the microphone shafts and another 2 to hold the base to the moving base. - 4 Screws to hold the base to a surface. - 3 M5 Nuts to tighten the GoPro style pieces. - 2 M4 safety nuts to hold the bases. - 2 normal M4 nuts To hold the microphone shafts. - Square rods of 10x10mm of the length that you need. You will NEED to PRINT: - 2x 3_patas_plano.stl - 1x 2_patas_codo.stl - 1x 2_patas_plano.stl - 1x Pared.stl - 1x Base.stl - 1x Soporte_mic.stl - 1x Eje_mic_1.stl - 1x Eje_mic_2.stl If you liked this design, you can just upload a photo to social media and tag me, i don´t ask for anything more. You can follow me on the Social Networks so you don´t lose anything about me! - Twitter: https://twitter.com/Diiego77_ - Instagram: https://instagram.com/Diiego77_ - Youtube: https://www.youtube.com/channel/UCgYHadWuJOd4tU8pAQjZebQ? - YouImagine: https://www.youmagine.com/diiego77/designs - RedPah: https://www.redpah.com/profile/19111/diego-miguel-picazo If you really like my work, I would appreciate a tip on my profile. Thank you so much!
Statistics
Likes
7
Downloads
0