Sheridan PGP Extended Feed Plug
Description
This is an extended feed plug for the Sheridan PG and PGP paintball markers. This design uses the original Allen screw from the stock feed plug and two #015 o-rings to secure the plug in place. There is also a hole running through the plug with a recess for a string to tether it to the marker. Note: Please make sure you have your print settings dialed in before using this. Layer adhesion issues may result in part of the plug getting stuck inside the feed tube. I recommend printing this in PETG with the part fan off, 100% infill, and print speed reduced.
Statistics
Likes
4
Downloads
0