Logitech Z313 TPU Damper Feet
Description
These are very simple feet for the Logitech Z313 Subwoofer because mine caused some resonances. Slice it in the orientation shown in the screenshot and print the first 20mm without shell and bottom layer - just infill (Pattern: Gyroid). It should be printed with flexible filament. I used TPU. In Cura do the following: Add the "overlap_box" and the subwoover feet. Highlight the box and move over the feet so it overlaps. Click "Per model settings" on the left side. Click "Modify settings for overlaps". Choose "Cutting Mesh". Add settings "Wall line count" and "Bottom Layers". Set both to 0. Slice To remove the original feet you have to remove the rubber stickers and unscrew them. Use the same screws for the new feet.
Statistics
Likes
2
Downloads
0