Full Breech Kit for Nerf Longshot
Description
##PRINT AT 0.16MM LAYER HEIGHT ONLY Please read Print Settings and notes. This is for use with 5/8" OD aluminium barrel. It will also work with tapered 16mm MonkeeMods barrels. The O-ring that will work with this is 5/4"OD with 3/32" diameter. Also known as a BS121 in the UK. The small O-ring that fits on the ramhead is 13mm OD 1.5mm diameter. 0.529"/13.4366mm ID aluminium tubing: (UK) https://www.1stchoicemetals.co.uk/product/58-x-18swg-15-88mm-x-1-22mm/ 0.527"/13.3858mm ID aluminium tubing: (USA) https://www.mcmaster.com/1658T11/ Bolt Cup O-ring: (big one) (UK) https://www.ebay.co.uk/itm/123255525936 Pusher O-ring: (UK) https://www.ebay.co.uk/itm/133283420183 I would like to credit Flechette_Spectre on thingiverse for the design of the back part which I redesigned to fit this part. I would also like to credit HerbmeisterNerf for his ram-head that I already knew worked for the aluminium barrel I was going to be using. I would also also like to credit Taffy for his advice and experience, aswell as Nerfshack and Treezy for their explaining of what lipless means, (seemed nobody else quite knew). An addition is now Nismo, again for his advice and experience. If you have any questions, problems, or advice, please message me on here or on discord @gungad#2312.
Statistics
Likes
4
Downloads
0