Snorkel Mask PAPR
Description
Disclaimer: I am creating this in an attempt to protect myself from potential exposure to COVID-19. I am not a qualified designer of medical equipment. I am providing these files in the hope that they are useful to someone. Please feel free to use this, remix it, and redistribute it. I only ask that you contact me for permission if you plan to charge money for it. **WORK IN PROGRESS** This is an adapter designed to fit a blower fan and filter assembly to the following snorkel mask from Amazon (it may fit others): https://www.amazon.com/gp/product/B07YFPHJCJ Here is the blower fan used: https://www.amazon.com/gp/product/B07RMJC9NT The adapter, as is, provides a decent seal from the blower fan to the mask, and can provide cool, filtered air. (Print all parts in place, secure the filter mount to the fan, stretch a piece of filter material over the top, and secure it with the cap. Outflow filtering is not yet implemented (that's next.) The model is intended to be print-in-place, if your printer can handle ~60-degree overhangs. To do: * Add inflow filtration * Add outflow filtration * Add provision for batteries and controls/monitoring * Test design * Reduce overhangs to 45 degrees or less
Statistics
Likes
2
Downloads
0