Long Servo Tray for KSTx08 servos RC gliders
Description
A rigid, long servo & receiver tray designed to fit tabbed KST x08 servos. Meant for narrower composite F3x, F5x RC glider fuselages (Nan, Vladimir, Jaro Mueller, etc). This recesses the Rx and tail servos rearward for more space and easier acces to battery and electronics under the canopy. This neater design features added stability and a grooved recess along the inside of the servo pocket to allow servo wires to be neatly hidden and routed to Rx. Servo cavities are designed 24.4x8.4x15mm tall. Allowing for FDM expansion tolerance it should result in a snug fit. Will require two m3 5x5mm diameter brass screw inserts. Mount holes are 140mm apart. Tray bottom is printed flat with a gentle chamfer - it should tolerate slight sanding to curvature, else print with extra bottom layers. Total tray length is 220mm, 16mm wide. *Credits:* This is redesign owes to <em>LoveRCSoaring</em> work on his Vladimir Models Shinto F3x servo tray for MKS 6100 servos. Thank you Philippe!!
Statistics
Likes
3
Downloads
0