Foam Dart Shooter (Nerf Dart Compatible)
Description
Foam Dart Shooter uses Nerf foam darts and generic ones should also work fine. This is a easy and fun project to do that achieves a really fun reward when completed! Awesome to have extras so everyone can participate, specially if you don't have enough Nerf guns to go around for everyone this is a cheap and easy alternative. Tools needed: Cutting tool such as a Hack Saw works perfect and needle nose pliers. Also Required: 3/4" PVC Pipe and 3D printed parts I cut the Tubes in to 20" sections, a standard size for traditional blow dart tubes. You could experiment with different sizes. Optional: Painting or hydro dipping your tubes. There is 1 part on the "mouth piece" that needs to be removed with needle nose pliers, it breaks oFf with little force. It is just a self made support and needs to be removed to be used, I have photos uploaded showing the part and what to remove. The "6 dart holder" is ONLY for the NON-Painted tube versions, using this version on a painted tube will cause damage to your paint/design. I will upload a different version for painted tubes in a few days. As an adult, I can blast a dart out of this quite hard and pretty far so Eye protection is recommended. I will add a few updated parts in the near future on things I think can be improved on.
Statistics
Likes
6
Downloads
0