Tevo Flash 5015 Dual Fan Cover
Description
This is a quick, no supports used print in PETG for the Tevo Flash for 2 5015 fans. The screw holes may need a quick drill to open, but I was using 0.4mm layers. The 5015 M4 holes are screw tapped at 3.8mm in the CAD. Fusion 360 and .step files are also available. Simply cut off the old fans, put some solder on the leads, bring the 5015 fan lead close and dab some solder to solder them together.
Statistics
Likes
2
Downloads
0