Paintball Marker Stand
Description
This is a folding paintball marker stand that I designed on Tinkercad. I wanted something that was big enough to hold an autococker but folded up reasonably small. In the picture I am using the standT to accommodate the added height from the 6" drop forward. I am using a 48 cubic inch bottle. It will easily accommodate larger bottles but I'm not sure up to what size. I have a 68 cubic inch tank coming in the mail, I will see if it fits and post an update. The file "70 pin" and "110 pin" are for those of you who may want to print your own hardware, I just used some 10-32 bolts. The mid piece has nut recesses to keep the slot opened up, to avoid scratching the trigger frame or the on/off valve depending on your setup. 8/12/20 Update: I added some modified stands that allow the unit to fold up in a more solid fashion. It also adds more support under the barrel. base - 110 W x 250 L x 29.5 H mid - 70 W x 250 L x 35 H standS - 70 W x 205 L x 22 H standT - 70 W x 229 L x 22 H NewStandT - 70 W x 229 L x 33 H NewStandS - 70 W x 205 L x 33 H
Statistics
Likes
5
Downloads
0