A/C drain extender plate for Frigidaire air conditioner
Description
Drain extender for Frigidaire window air conditioner model #FFRE08L3S1 (may fit other models). Slices fine at 0.3mm, 2 perimeters, 2 shells, 10% gyroid infill. Print in the same orientation as it will be used. Needs supports between part and build plate only to allow for gentle slope of chute. The drain plate is held in place by 16 neodymium disc magnets, 8mm x 3mm: six can be installed after printing, and ten must be placed while printing so they are fully encapsulated (pause the print before enclosing layer, install the magnets with a drop of glue, continue). Two extensions are included that direct waste water farther away from the building; they are friction-fit, but can be glued if desired. Please post a make photo if you print this; remixes welcome!
Statistics
Likes
0
Downloads
0