Wider 3DFuns Skid loader for n20 motors
Description
Although the 3DFuns loader is awesome, I faced the same problems as many commenters. The control board and motors are hard to come by. So I decided to tweak it a bit, which was fairly easy because I had followed the youtube Fusion360 designing instructions. I made it wider and it now fits n20 motors and basic 2S-3S bidirectional esc coupled with any small receiver. Barely, but they fit... I used these (or similar): -ESC: https://www.ebay.co.uk/itm/Dual-Way-Bidirectional-Brushed-Esc-2s-3s-5A-ESC-Speed-Control-For-Boat-Tucker-E/293651460939?epid=14023576343&hash=item445efdb34b:g:cJEAAOSwCSxfEUn7 You may need to move the capacitor, good place is at the other end of the battery lead. -Motors: n20 600RPM. https://www.ebay.co.uk/itm/N20-30-600-1000-1200RPM-DC3-6-12V-Micro-Deceleration-Gear-Reducer-Motor-Tool/352515604663?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 -Receiver: https://www.banggood.com/2_4G-8CH-D8-Mini-FrSky-Compatibel-Receiver-With-PWM-PPM-SBUS-Output-p-1140478.html?rmmds=myorder&cur_warehouse=CN -Battery: https://hobbyking.com/en_us/turnigy-nano-tech-300mah-2s-35-70c-lipo-pack.html Of course you have to have a transmitter, like Taranis or whatever. You still need to print some parts from the original design. I left a few different lenghts of dummy_axis_lift_arm because I can't remember anymore which one I printed.
Statistics
Likes
36
Downloads
0