Snapmaker Laser Test - super simple
Description
A very simple laser test. This was made in Snapmaker Luban for a Snapmaker A350. Not sure how it will work on other laser machines. Try it out and let me know. It cuts lines from 10% to 100% power @140mm/min, 2 passes, 0.6mm pass depth (vector) Grayscale squares from 5% to 100% black using both the stock greyscale (normal quality 7 dot/mm, 500mm/min) and b&w (4 dot/mm, 800mm/m) settings. Test shown was done on 1.6mm baltic birch. As you can see it cut through cleanly on several of the cutting tests.
Statistics
Likes
15
Downloads
0