Vallejo Paint Shaker/Mixer for Drill
Description
I really liked the mixer by schleprocker. But i wanted to improve its design for safety. I was not a fan of plastic on plastic friction. My design utilizes a common 608 bearing. This ensures smooth rotation without introducing friction and heat. This design mixes paint without introducing air bubbles. - The "crank" has a 10mm drill shank.There are two versions. Normal rounded end and a second version with flat sides. ***The one with flat sides is only for those drills with weird shucks, where the inside has fully flat faces. This will ensure more surface contact area when tightening. - Paint adapter accepts a 608 bearing at the bottom. Bearing has a 0.2mm clearance and depending on your machine's tolerances it may be a tight fit (That's what you want, the bearing should not fall with gravity) - Paint adapter 17 is for 17ml Vallejo bottles. (26mm internal Dia) - Paint adapter 60 is for 60ml Vallejo bottles. (36mm internal Dia) (will also fit Apple Barrel bottles) Use: - attach crank to your drill tight enough not to brake it. - (bearing should already be pressed into adapter) - put adapter into crank - put bottle into adapter - hold the bottle and adapter with one hand (It will not spin) - turn drill on ** The bottle and adapter will vibrate, but SHOULD NOT be spinning on its axis.
Statistics
Likes
42
Downloads
0