KWA M11A1 Folding Stock Attachment
Description
This is a simple button locked folding stock design for the KWA M11A1 (mac-11). I have not tested this with the HFC model or any other ones. BasePart.stl - This inserts into where the regular extendable stock is. It might flex a little. It locks in by the same mechanism of the regular stock. AttachmentPart.stl - This hinges into BasePart.stl with Pin.stl Button.stl - This goes into AttachmentPart.stl with any sort of spring inside it, I designed it to fit a long type motor spring. AttachmentPartCover.stl - This should superglue onto AttachmentPart.stl after the button is on. It's fine if it is not a completely flush fit. FirstRod.stl/SecondRod.stl - This inserts into AttachmentPart.stl via the angled holes. ButtPad.stl - This inserts into the two rods.
Statistics
Likes
4
Downloads
0