TheSmartFarmCo bottleponics stand - hydroponics bottle holder
Description
We wanted to release something quickly for people to make a start on our bottleponics project so here is our simple bottle stand. Simply print two of these and lay your plastic bottle horizontally in them to stop it rolling away ! This is a very simple design and has been created to print easily without waste material and although simple allow a large range of versatility in what you can create with/from the bottle. You can drill holes in the bottle and pop in some hydroponic planters, you can take a slice out of the top, put some gravel inside and sit your regular plant pots on or you could even adapt it to be a water tank and fit it with a water pump to become the heart of your new hydroponics system. These are based on a plastic 2 litre bottle with a diameter of approximately 100mm (about 4") We hope to have a lot more parts coming shortly, If you wish to be updated and are interested in what we are doing please give us a follow on twitter @TheSmartFarmCo https://twitter.com/TheSmartFarmCo It is always nice to see photos of our projects being used and adapted by the maker community so please post makes and reviews and share with your friends and family ! We actively encourage distribution and selling of our bottleponics items to make them readily available to people without 3D printers and will be developing some instructions, BOM's and kits in the coming weeks which will be available from our website: http://www.thesmartfarmco.com along with a set of guidance notes.
Statistics
Likes
9
Downloads
0