Pi Din/Vesa Cases
Description
Remix of the VESA Pi cases, with a added DIN rail clip. Pi3 bottom, also works with pi 2, and PiB+ You will want to flex the din clip manually before trying to install it on the rail. IT can be very stiff right after printing, after giving it a couple flexes, it then is able to snap on and off easily. For the Pi3 and Pi4, to attach the board to the bottom case use m3x6 screws(if you have an M3 tap to thread the case it'd be recommended.) For all but the Pi0, carefully insert m3x18 screws to attach the lids to the base(if you have a tap to thread the bottom it'd be recommended. Or M2 screws if you heat set an M2 nut into the base. All cases except the PI zero also have the 75mm vesa mount. The pi-zero has a separate design that includes the vesa mount as it is so much larger than the case for just the pi.
Statistics
Likes
16
Downloads
0