ARLISS Lite - 29mm S4 Payload Rocket
Description
29mm version of the S4 ARLISS Lite payload rocket. Designed for avionics recovery. 29mm fiberglass airframe. Printed nosecone. Printed recovery anchor. Printed fin can. Printed screw-on motor retainer. Printed flyaway launch system. 54mm version of the S4 ARLISS Lite payload rocket. Find the description of the S4 project here and Thingiverse project for the S4 satellites here. This airframe uses a 54m motor mount is designed for 29, 38 and 54mm motors. It is designed for apogee avionics recovery. It is based on a core 54mm fiberglass airframe with the following printed parts, preferably in ABS, enhanced PLA or PETG for strength and temperature resistance. + Printed payload nosecone with inserts to carry 1p or 3p of S4 satellites. Nosecone includes avionics sled for recovery avionics - nominally an Altus Metrum EasyMini. + Printed recovery anchor. A forged eyebolt to attach the recovery harness. + Printed fin can with integral standoffs for rail buttons. OpenSCAD library was used to Design fin can.
Statistics
Likes
2
Downloads
0