Collapsible Foldable Cheap Enclosure for Prusa i3 and MMU
Description
Collapsible Foldable Cheap Enclosure for Prusa i3 and MMU. Printed from PETG and some really old and cheap ABS. (I would print it from PETG personally). Uses 20mm PVC Tube available from hardware stores and a 3x4m polyethene sheet from wickes (UK). Here's a link to the fusion 360 assembly of just the frame: https://a360.co/2CLWJBU You will need for the Frame: 4x Front Top Right Corner 4x Front Top Left Corner 4x Hinge RH 4x Hinge LH 2x Hinge RH Latch 2x Hinge LH Latch 2x Hinge RH DownTube 2x Hinge LH DownTube 4x Latch 4x Centre Hinge Join For a Prusa i3 Mk3s with a spool on top: 6x 650mm PVC Pipe (20mm) 4x 620mm PVC Pipe (20mm) 8x 290mm PVC Pipe (20mm) For the Cover: At least a 2.5mx2.5m sheet (I used https://www.wickes.co.uk/Wickes-All-Purpose-Heavy-Duty-Polythene-Protector-Sheet---3-x-4m/p/114301) For the Cover Clips: (These are recommendations)(Look at my images) 24x Sheet_Clip_Assembly_v1.stl 14x Sheet Clip C 6x Sheet Clip D For the frame door: (mirror the parts for both sides, ensure magnets are embedded) 4x Frame Corner 4x Frame Corner (mirrored) 6x Frame side 6x Frame side (mirrored) I used 1.75mm PLA filament for the hinge rods And a shit tonne of sheet clip pins (sorry)
Statistics
Likes
39
Downloads
0