Milk Bottle Cap
Description
Milk Bottle Cap I printed the Milk& More Bottle Top (https://www.thingiverse.com/thing:3559128) but found it difficult to remove from the bottle so I decided to redesign. But thank you Tim for the inspiration. I will fit UK Milk and More bottles, but should fit other company bottles as I believe they are all a standard design. Please let me know. If not you can always tweak the design as I have included design file. My design does not completely seal the bottle, but will stop accidental spillage. As it has three clips it has a more positive fit (as the clips can move) and with the rim around the outside it is easier to remove from the bottle. It was designed in Fusion 360 and I have included the design file. So if you need to adjust the clip diameter (radius in this case). Edit the parameters (modify, Change Parameters) and find under Cap/Profile “CapInsideRadius” and change the radius. I printed mine in PLA, which should be food safe. But due to the printing process the layers etc. do leave the possibility of gaps where bacteria could hide. Therefore please make sure you clean it thoroughly before use and at regular intervals. We have had no issues so far, but be warned!
Statistics
Likes
1
Downloads
0