Mask Fog Blocker
Description
#Mask Fog Blocker ###Uses This piece stops your glasses from fogging up when wearing a mask, by blocking air you exhale from escaping through the top of the mask. ###Instructions Print as per the settings below. Supports are not needed unless your printer struggles a lot with overhangs (~45 deg). Tie elastic (or rubber bands) to the holes in the edges. Wear this over your mask with this piece pressed up against your cheeks and nosebridge. ###Customization As each person's face is different, **I recommend using the source file to change the user perimeters to adjust the size and features**. In the source file most of the features can be edited, such as the size and angle of inclination of the nose rest, curvature and length of the cheek rests etc. You will only need key in values for each setting. (In Fusion 360 this can be found under `Modify` > `Change Parameters`.) However, if you want to start printing right away I have uploaded 3 different stl files with different sizes for reference, though you should adjust the settings in the source file to ensure this fits over your face comfortably. A huge advantage of 3D printing is being able to print customized objects, so you might as well take advantage of that. Any remixes to improve on the design are welcome!
Statistics
Likes
18
Downloads
0