Blue Yeti Mic Dust Cover (vase)
Description
A quick solution for keeping your Blue Yeti mic grill clean, dust-free, and protected from damage. Black or White PLA recommended depending on your model. (It also doubles as a cup if you want) Diameter is 69mm (I initially tried 67mm and didn't fit. You might be able to try 68mm depending on your resolution) I use my mic 2 days a week for online teaching, so the other days it's just collecting dust. I put this together in TinkerCAD. I had issues trying to add the Blue logo to the bottom, so I just used the plain text object. It could probably be tweaked a bit further, but for the time being it works. This is designed to be printed in Vase mode (it's solid). I used a 1mm nozzle, so it feels pliable but sturdy. I had silver PLA loaded when prototyping, so that's why the images are silver. I'd recommend black to match better. Maybe I'll update when I reprint. 1mm nozzle; 0.72mm layer height (initial layer 0.48mm); Line width 1mm (initial layer line width 0.8mm); 3 top/bottom layers; Initial layer horizontal expansion -0.1mm (for elephant's foot); 205/55 deg; Print speed 40mm/s (initial layer print speed 15mm/s); Vase mode
Statistics
Likes
10
Downloads
0