VKB Gunfighter III and Gladiator-K adapter for J-PEIN desk mount
Description
I was after a cleaner look mounting the VKB joysticks to the J-PEIN mounts. Custom mounting options for the VKB Gunfighter III and VKB Gladiator-K with the J-PEIN Desk Mount. The Gladiator-K mount is offset and pushes the base back by 30 mm to avoid interference vertical part of the mount. The bases will attach to the J-PEIN mount with the supplied M6 screws. These are hard to get started, I used an impact driver to get them started. The gunfighter uses 4 x M4 screws 12-15mm The black box use 4 x M3 screws 10 mm the insert for the extrusion profile is a tight fit so it won't slide. It takes a little persuasion to get it where you want it. I printed the black box mount vertically with supports for the screw holes everything else is flat with no supports. The Gladiator-K uses 4x M4 screws 10-12 mm. Use the screws to cut the threads before assembling.
Statistics
Likes
9
Downloads
0