AsksinPP Analyzer CS case for a nanoCUL CC1101 USB stick
Description
This are STL files for a case of an AsksinPP Analyzer XS USB stick based on a nanoCUL CC1101. For details, please refer to https://github.com/psi-4ward/AskSinAnalyzerXS : Alternativ funktioniert auch der nanoCUL CC1101 mit angepasstem GPIO Mapping. Siehe Flash-Anleitung NANO CUL 868MHz Stick für Windows. The GPIO Mapping needs to be adopted, see https://homematic-forum.de/forum/viewtopic.php?f=76&t=56395&start=10#p562580 The nanoCUL CC1101 USB stick with antenna can e.g. be purchased ata Amazon: https://www.amazon.de/dp/B07T252HR7/ref=pe_3044161_185740101_TE_item The heat shrink tupe needs to be partially removed with a cutter, see provided pictures. The OLED display SSD1306 needs to be glued in place into the case top with two-component adhesive. Suitable borderings are part of the case top. A pressure support part analyzer_xs_case_top.stl is provided for fixing the display with an elastic bande during glueing, see picture pic5.png. Be careful with the glue and put only little of the glue to the gap between borderings and OLED display in order not to pollute the dispay of the OLED. Check and adjust the fine positioning before you apply the glue with switched on OLED display. The OLED display can be purchased e.g. at Amazon: https://www.amazon.de/dp/B07BDFXFRK/ref=pe_3044161_189395811_TE_SCE_dp_1 Enjoy!
Statistics
Likes
1
Downloads
0