Nereus Face Plate
Description
Print: ================== Case: Printed with Brim and Supports with Case front UP Sides: Supports are not required and usually print bottom down There are 3 different Modular Designs: =================== Stock TFT ================= Requires 2 sides and the TFT Case. The Left Side with USB/SD Recommended for this setup Hardware: 4x m3*8 screws/nut and m4 screws with T-Nuts on side TFT 3.2 ================= 3.2 TFT works as expected with tight compression fit. Requires Left/Right Hardware: 4x m3*8 screws/nut and m4 screws with T-Nuts on side 5" OctoPI TFT ================= This Design does has its own setup and different sides due to the 5" screen. Requires 4 files: Nereus_5PI_Right.stl Nereus_5PI_Left.stl Nereus_5_PI.stl Nereus 5 PI Support.stl Designed to use Screen: https://www.amazon.com/gp/product/B072813CS7 I also recommend a right angle adapter for your power such as https://www.amazon.com/gp/product/B0886BJJVV Hardware: 4x m3*8 screws/nut and m4 screws with T-Nuts on side
Statistics
Likes
4
Downloads
0